Single-use Injection System for IOLs Suggested Incision 2.2mm
Implantation of a foldable intraocular lens (IOL) during cataract surgery through a small incision usually requires an injector system. The Injection System for Intraocular Lens consists of a sterile disposable injector with the silicone plug and a disposable cartridge. The cartridge is made of medical grade polypropylene. The product is used for the foldable intraocular lens implantation in cataract surgery.
Single-use InjectionSystem for IOLs Suggested Incision 2.2mm Features
- Microincision intraocular lens implantation is realized through this injector system, which incision size range is 1.8mm/2.0mm/2.2mm2.4mm/2.6mm.
- The cartridge is made of medical grade polypropylene which has high molecular weight uniformity and good biologival safety.
- The Injection System for Intraocular Lens structure design conforms to the requirments of ergonomics with good control and stable injectortion.
- The Injector has thicken head to prevent the cartridge from falling out during Injector.
- The cartridge is closed tightly during injection process because of locking mechanism design,whcih will benefit to smooth implantation.
- The cartridge tunnel is transparent, which is convenient observe the intraocular lenses loading and avoid the failure of injection.
- The primary package of products is designed to ensure stable transportation and avoid packaging debris falling off.
Single-use Injection System for IOLs Suggested Incision 2.2mm Instruction for Use
- Open the package using standard sterile procedure.
- Apply moderate amount of viscoelastic gel into the cartridge tunnel.
- Along the cartridge direction load the intraocular lens into the center place of the opened cartridge with the lens in reverse "S" shape, then close the folding wings with a "click" locking sound.
- Place the cartridge in the groove of the injector, press it down to the bottom, and then push forward to the end.
- Use the injector to implant the intraocular lens.
